Cable broken or hanging loose?
Garage Door Cable Repair
Get the lifting system inspected. Get a Free Estimate
Garage Door Cable Repair and Replacement
Garage door cables connect the spring system to the door and help transfer lifting force evenly from side to side. When a cable breaks, frays, slips from a drum, or loses proper tension, the door may become crooked, jam in the tracks, or stop moving altogether.
Cable problems should be treated as part of the complete lifting system. We inspect the cables along with drums, springs, bottom brackets, tracks, and rollers to determine why the cable failed or moved out of position.
Signs of a Garage Door Cable Problem
Garage door cables carry substantial load during every opening and closing cycle. Their condition can be affected by age, corrosion, worn drums, spring problems, track issues, and uneven door movement. A cable that has slipped or broken may also create secondary problems elsewhere in the system.
Broken Lift Cable
A broken cable can cause one side of the door to lose support. The door may lean, jam, or become impossible to lift normally. We inspect both sides of the lifting system before replacing damaged cable components.
Frayed Cable
Visible fraying is a warning that individual cable strands are wearing or breaking. Continued use can lead to complete failure, so worn cables should be evaluated before they separate.
Cable Off the Drum
A cable can jump or unwind from the drum when the door becomes unbalanced, encounters an obstruction, or develops another mechanical fault. The reason for the displacement should be corrected before the cable is reset.
Uneven Cable Tension
Uneven tension can cause the door to rise differently from side to side. We inspect cable routing, drum position, spring balance, and related hardware to identify the cause.
Garage Door Cable Repair Cost
| Service | Estimated Cost | Average |
|---|---|---|
| Cable reset and adjustment | $150–$275 | $210 |
| Cable replacement | $225–$425 | $325 |
| Cable and related lifting hardware repair | $350–$700 | $525 |
Actual pricing depends on cable type, door size, spring system, drum condition, bracket condition, and whether additional lifting-system damage is present.
Why Choose Us for Garage Door Cable Repair & Replacement?
Both sides inspected
Even when only one cable shows obvious damage, we examine the full lifting system for uneven wear or related problems.
Drums and springs checked
Cable performance depends on the drums and spring system, so those components are part of the diagnosis.
Door alignment verified
After cable work, we check whether the door lifts evenly and remains properly aligned in its tracks.
Contact Us Today for a Free Estimate
If a cable is loose, frayed, or broken, avoid forcing the door and schedule an inspection.
Free, no obligations
Our Cable Repair Process
Inspect the damaged cable
We determine whether the cable is broken, frayed, loose, improperly routed, or displaced from the drum.
Check related hardware
The spring system, drums, brackets, tracks, rollers, and opposite-side cable are inspected for contributing problems.
Repair or replace the cable
Damaged cable components are replaced or reset after the underlying mechanical issue is addressed.
Restore even lifting
Cable position and system balance are checked so both sides of the door move together.
Test operation
The door is cycled to verify smooth, stable movement through its normal travel.